What's happening
A November 2026 tested roundup of event gobo projectors concludes daylight outdoor wall projection needs 12,000+ lumens, naming the COLIFINE 150W (15,000 lm) the top outdoor pick. It reiterates IP65 = dust-tight + water jets, IP67 = temporary immersion, and that for permanent outdoor installations IP67 is the safer choice; tested IP67 units (COLIFINE, YYD, Begooat) survived spray tests. Glass gobos are recommended over metal for corporate logos and wedding monograms.
Why it matters for buyers
For a retailer, venue or signage buyer, the practical effect is simple: the unit that reads on your wall at your ambient light, with your artwork, beats the one with the bigger number on the box. Specification order — distance, image size, ambient, then brightness — decides the result.
It also changes lead-time risk. Custom gobos and certified outdoor builds need briefing before the date is fixed; the projector is rarely the long pole, the artwork and certification are.
The technical angle
Ingress protection is the spec that quietly decides lifespan. IP65 keeps rain and dust out of the body; IP67 adds temporary immersion tolerance for ground-level or wash-down locations. The rating only holds if the cable gland and gasket are seated — a loose gland defeats a higher number.
What to specify
Before you request a quote, lock these down:
- Lead time on a custom gobo versus a stock pattern
- Throw distance from bracket to surface, measured on site — not estimated
- MOQ and dispatch window before the event date
- Gobo material: glass for longevity and colour, metal for cheap short runs
