What's happening
Noparde published two 2026 field cases for its 120W outdoor gobo logo projector. A Tuscany winery (June 2026) projected its crest on a heritage stone wall without drilling by adjusting throw distance to 7.5 m for a 3.2 m sharp logo. A Ljubljana food festival (August 2026) used two units on a walkway, learning that brightness, not just image size, dictates usable throw distance in varying ambient light.
Why it matters for buyers
For a retailer, venue or signage buyer, the practical effect is simple: the unit that reads on your wall at your ambient light, with your artwork, beats the one with the bigger number on the box. Specification order — distance, image size, ambient, then brightness — decides the result.
It also changes lead-time risk. Custom gobos and certified outdoor builds need briefing before the date is fixed; the projector is rarely the long pole, the artwork and certification are.
The technical angle
Ingress protection is the spec that quietly decides lifespan. IP65 keeps rain and dust out of the body; IP67 adds temporary immersion tolerance for ground-level or wash-down locations. The rating only holds if the cable gland and gasket are seated — a loose gland defeats a higher number.
What to specify
Before you request a quote, lock these down:
- Throw distance from bracket to surface, measured on site — not estimated
- Ambient light level at the hour the projection must read
- Gobo material: glass for longevity and colour, metal for cheap short runs
- Certifications required for the market (CE / RoHS / FCC)
