What's happening
Infinity Projectors' embedded gobo projector mounts flush into ceilings and walls for discreet branding, spanning 15W to 100W with IP65 waterproofing and 4K/HD imaging. Each unit ships with two free custom gobos (one full-colour, one single-colour) and a remote for rotating-logo mode; throw ranges from 6 ft (15W) to 33 ft (100W) in the dark.
Why it matters for buyers
For a retailer, venue or signage buyer, the practical effect is simple: the unit that reads on your wall at your ambient light, with your artwork, beats the one with the bigger number on the box. Specification order — distance, image size, ambient, then brightness — decides the result.
It also changes lead-time risk. Custom gobos and certified outdoor builds need briefing before the date is fixed; the projector is rarely the long pole, the artwork and certification are.
The technical angle
A logo projection only looks sharp if the artwork arrives as a vector. Raster logos get re-cut at low resolution and the edges soften on the wall — the single most common 'why does ours look fuzzy' cause.
What to specify
Before you request a quote, lock these down:
- MOQ and dispatch window before the event date
- Ambient light level at the hour the projection must read
- Ingress rating if it lives outdoors or gets washed down
- Gobo material: glass for longevity and colour, metal for cheap short runs
