Why "Halftone Dots: Photo Gobo Explained" matters for dot pitch, throw, tone
Choosing the right gobo projector for dot pitch, throw, tone is less about raw brightness and more about matching optics, throw distance and weather rating to the job. A mismatched unit either washes out or fails early.
This guide focuses on the lens class of Jingyu gobo projectors, the models we see specified most often for dot pitch, throw, tone, and the trade-offs that actually move the result.
Specs that matter for a lens gobo projector
For dot pitch, throw, tone the three specs that decide success are optical clarity at distance, ingress protection, and thermal headroom.
- Brightness / power: enough to read the mark at your throw distance without blooming.
- IP rating: indoor installs can run non-sealed units.
- Gobo size: 37 mm glass or 53 mm for finer detail; metal gobos for high-power beams.
- Control: DMX, remote or app scheduling for dot pitch, throw, tone.
Compared: models that fit dot pitch, throw, tone
Below is a side-by-side of gobo projectors we would shortlist for dot pitch, throw, tone. All are real Jingyu SKUs.
| Model | Power | Ingress | Price | Best for |
|---|---|---|---|---|
| Single-color Dual-color Three-color Full-color Custom Gobo | — | — | $10 | weatherproof outdoor use |
| Safety Road Traffic logo Sidewalk zebra | — | — | $10 | weatherproof outdoor use |
| 15W IP67 Outdoor LED Gobo Projector, | 15W | IP67 | $59 | IP67 outdoor use |
Installing and aiming for dot pitch, throw, tone
Good projection for dot pitch, throw, tone is 70% placement, 30% hardware.
- Measure throw distance and pick a lens that keeps the mark sharp at that range.
- Mount stable (pole, wall bracket or ceiling recess) clear of vibration and direct rain if outdoor.
- Aim, then fine-tune focus and keystone; lock the gobo and test at night.
- Add a timer or DMX cue so the mark appears only when dot pitch, throw, tone needs it.
Common mistakes to avoid
These are the failures we are asked to fix most often for dot pitch, throw, tone.
- Undersizing power, then fighting wash-out with higher gain that blooms the logo.
- Skipping IP rating outdoors and watching the unit fail in the first storm.
- No focus test at the real distance — sharp on the bench, soft on the wall.
- Ignoring local plug / voltage and shipping the wrong adapter.
Quick buying checklist
Before you order for dot pitch, throw, tone, confirm these five points.
- Throw distance and required image size are known.
- IP rating matches indoor/outdoor use.
- Gobo is custom (logo/monogram) or a stock pattern.
- Voltage / plug matches the install country.
- MOQ, lead time and certifications (CE/RoHS/FCC/ISO9001) are confirmed.
